Tel No. (+86) 371-55629010

hot water dzl boiler

3, high thermal efficiency

Boiler is an energy conversion equipment, professional production of low-nitrogen boiler as available and high-grade thermal energy necessary for life, for gas boilers, machinery (solid) incomplete combustion heat loss and ash physical heat loss is negligible. Want to improve the efficiency of the boiler, the boiler only reduce heat loss and heat dissipation reduce exhaust gas temperature.

Why can replace the traditional gas hot water dzl boiler boiler equipment? As long as it's time to go to understand the boiler equipment, you will find this device, it can become a lot of places will use to a heating device, capable of providing hot water needed for people in the winter time, it can people will become familiar with the equipment, but also because of this, so that the application range of boiler equipment today is quite a wide range. That at the time of such boiler equipment to be understood, this might have found that it is now the boiler equipment began to appear a lot of different forms of energy, including the current gas boiler equipment, it has begun to be able to replace the traditional boiler equipment, mainly because such a device can have a lot of advantages. Familiarize yourself with it, you can find such a gas boiler equipment began to have changed a lot, and that is because it is part of a gas-based device, so the cost is relatively low, it is possible to see. And such devices, today is more simple in operation, but also has a safety device, so the security that is completely do not have to worry about, so can rest assured to operate, thereby direct guarantee of boiler equipment has been applied assured. That such a gas boiler equipment, should be able to be a lot of industry which will use the equipment, after the birth of such a device, people were thinking before heating, hot water and provide the required, can now become people will understand that the device, in that school, is among the companies can get a good application, has been widely used.

After the project identification, party fast technical staff soon made contact with our company, to our installation, commissioning, to ensure the look normal, stable use during hot water dzl boiler operation. Thanks fast boiler professional technical support and good service, I provide a lot of help for the textile dyeing and finishing production company. --customer feedback

Fuel gas steam hot water dzl boiler cleaning methods and maintenance Comments? Necessity boiler steam boiler fuel gas washing operation over a long period, the inevitable emergence of scale, the problem of corrosion, boiler scale formation is mainly due to the water with hardness components, high temperature, high pressure after continuously concentrated by evaporation in an oven within a series of physical and chemical reactions that ultimately form a hard heating surface, a dense scale. Maintenance 1 gas fuel steam boiler, gas steam boiler feed water must go through qualifying process, which is to extend the life of the boiler, ensure the safe operation of the important issues. 2, feed water temperature should be as close to the furnace temperature, preferably above 20 ℃. 3, the low water cutoff for periodic inspection and maintenance and cleaning apparatus. Water Level Controller cleaned at least once a month, rinse water table at least once a day. Rinse water table should be at the highest level; after flushing the water level should not be less than the minimum safe level, not as a net wash, can wash many times, but it must be flushed at the highest level. 4, requires periodic operation of sewage per day (per shift) at least once, you should check whether the sewage drain valve due to possible contamination and leaks; if it must be excluded. 5, when the steam pressure is not maintained while the shutdown, the steam boiler space air entrapment generates negative pressure, and therefore should rise again to the fire burning total steam valve is opened. 6, after the smoke tube fouling will lead to increased exhaust gas temperature, so that boiler efficiency is lowered, so that the fuel consumption increases, it should periodically open the front door, brushing or blow smoke tube fouling.