Tel No. (+86) 371-55629010

pelet biomassa jerami boiler air panas

For subcritical pressure natural circulation pelet biomassa jerami boiler air panass and the control loop, to prevent premature film boiling, heat the mixture to delay the deterioration of soda, high thermal load in the furnace burner area is disposed, the use of internally threaded tube instead of the smooth inner wall of the light pipe to manufacture water wall.

5, steel flue and reliable insulation measures should be fixed.

6, a fuel gas boiler room boiler should correspond to a chimney, when required by the conditions a boiler flue or chimney common to several units, each boiler should be ventilated suction force balance.

7, when the flue arrangement provided the necessary thermal and environmental measuring point measuring point in place. Single rated evaporation amount is equal to 20t / h or single thermal rating of greater than or equal 14MW oil-fired boiler, a fixed continuous monitoring must be installed in the flue gas dust, SO2 emission concentration instrument.

8, in the flue gas gathering place easily and when many boilers a share or a total chimney flue shall be fitted with explosion-proof door on the flue after each fuel gas-fired boiler, the location of the vent should be conducive to relief, It should be provided without jeopardizing personnel safety and proper position before turning, when explosive gas may endanger the safety of the operator that should be installed on the guide tube explosion relief means.

9, for some long flue boiler room, they should be accounted for resistance, select the appropriate blower, Fan (when there is draft fan), to ensure the smooth flow of exhaust.

10, the chimney should be considered appropriate anti-corrosion measures, chimney flue gas outlet temperature is preferably above the dew point of the flue gas temperature of 15 deg.] C; when the exhaust gas temperature is lower than the dew point temperature of flue gas, the flue gas should take effective measures to prevent the intrusion.

Industrial pelet biomassa jerami boiler air panass defects occur approach to industrial boilers industrial boilers defect approach defect approach appears according to "Boiler Safety Technology Supervisory Regulations" TSGG0001-2012 first article 5.4.1.2, the boiler should be carried out major repairs. Installation and repair should be qualified in accordance with relevant technical units standards and technical regulations, but no pressure element replacement requires less than the required boiler design and manufacture. According to "Rules Rules chemical cleaning boilers" TSGG5003-2010, perform the chemical cleaning boiler cleaning. Industrial boilers defect prevention measures using the unit managers, workers should enhance learning and strict implementation of the safety management system boilers, boiler water (medium) quality management system; to ensure reliable operation of water treatment systems, boiler feed water quality assurance; conditions can be the establishment of boiler water quality laboratory, real-time monitoring of water quality boiler operation, there is growth targeted control of scale.

After the pelet biomassa jerami boiler air panas put into use, such as the hotel responsible person to give us feedback: fast boiler advanced product design, simple and intuitive operation, the most critical is energy saving, low NOx emissions, can be used in the Beijing area. Compared with other boiler brands, fast Boiler made us worry. --customer feedback