Tel No. (+86) 371-55629010

Double Drum Coal Boiler

Low nitrogen double drum coal boiler technology made a major breakthrough, however gratifying that through the unremitting efforts of domestic boiler companies, China's low-NOx combustion technology gradually into the world advanced list, catch up with a lot of foreign advanced technology.

Note the use of an industrial double drum coal boiler fan which 1, strengthen the operation and management, ban illegal operation. Industrial boiler drum fan up and running, there must be strict rules. The induced draft fan starts to be unloaded, non-load starting, particularly when the boiler stoked, flue gas temperature is too low, such as the induced draft fan starts with load (i.e., open the blower inlet damper or fully open), a current will start increased a lot, and start-up time is too long, the fan motor can overheat, overloading is likely to burn out; when the boiler (particularly pulverized coal) Jan-fire operation, pay attention to drums, fan's opening sequence, can not be reversed. I.e., first open fan, run for 10 minutes, and to exclude the furnace flue fouling or flammable gases, before the blower starts. If the first open blower, the induced draft fan, so that both the induced draft fan load is increased, so that the induced draft fan motor overheating burned, and the furnace may lead to explosion. 2, industrial boiler flue gas dust removal blowers take measures to regularly clean the flue, induced draft fan to improve the working environment. Dust removal equipment units to strengthen the dust removal operation and management, improve the efficiency of dust removal; no dust removal equipment units to time quantitative dosing into the boiler furnace special cleaning agents, and timely removal of fouling of the flue, the flue avoid clogging, the impeller damage accidents. 3, the impeller blade surface hardening treatment to improve the wear resistance of the blade. Since the large fan boiler drum conveying high temperature flue gas is about 200 ℃, the flue gas contains large amounts of fly ash, SO2 and other corrosive gases, badly worn fan blades, fan output prone to drop, vibration, such as rupture of the blade. Therefore, to deal with a serious face or wear parts of welding blades to improve the wear resistance of the blade. Use DC welder welding, arc welding using manual method using a dedicated fan hardfacing strip (e.g., wear No. 1, Mo-Cr-B carbide electrode wear, etc.), and the electrode wear in 300 ~ 350 ℃ drying 1 hour use. Before welding, the surface of the blade should be fouling, rust cleaned, preheated to 100 deg.] C, with a small current, low voltage, temperature and speed, short arc welding symmetry. Practice has proved that, after surfacing treated leaves, wear resistance greatly improved, not only changed the fan impeller often wear, but also laid a good foundation for the safe operation of the fan. 4, insist on Boiler Fan periodic overhaul, maintenance of strict quality control. Industrial boiler drum Fan to be overhauled on a regular basis. The elimination before the accident hidden danger in the bud, to overhaul a comprehensive, thorough, carefully check the wear, the impeller shaft and impeller balanced operation, with or without internal connections loose, collision, inlet baffle switch is flexible and bearing lubrication and cooling Happening.

Washing plant choose what fuel steam double drum coal boiler more cost effective? Washing plant with a steam boiler fuel is more cost effective to what has been plagued by the problem that a lot of users, and today we analyze this problem. According to cost savings for the selection of coal-fired or biomass steam boiler more cost effective, gas steam boiler is relatively easy but the cost is relatively high, in some places not to use coal and no natural gas pipeline, then select the burn methanol, more than liquefied petroleum gas and fuel oil province, Taikang County Hengyu thermal equipment Co., Ltd. is specialized in producing supervisory inspection-free steam boiler, a more comprehensive model specifications from 0.3 tons to 0.5 tons of large tonnage steam boilers, coal-fired fuel, raw materials, fuel gas and combustion of methanol, fully automatic operation out of steam quickly and does not require supervisory inspection, I have a lot of cases washing plant, the company Sina, Netease, Tencent and other major news HC have reported. What you do not understand can inquire our company.

Development of CFB for power generation has been ongoing for several decades. At the end of the 1970s,First introduced CFB combustion technology originally developed for heterogeneous reactors, to the field of coal combustion. CFB operation is characterized by rapid gas–solids mixing, reactions, and heat transfer, all of which create an environment in which low-grade solid fuels can be stably burned at 800–900°C. At these relatively lower temperatures, NOxformation and emissions are much lower than what is observed for PC combustion. In addition, limestone additives can be combined in the double drum coal boiler to capture the SOxin situ. Therefore, CFB offers the least expensive means to control NOxand SOxemissions from coal combustion. Other environmental benefits, such as waste reduction and a smaller carbon footprint, can also be achieved through cofiring coal with biomass or waste. As CFBs are inherently fuel flexible, they can readily accept lower rank fuels that can be varied over time pending availability and other factors.