Maintenance of oil-fired top manufacturer boiler 8t lithuania oil-fired boiler when not long-term maintenance method when do: dry and wet two kinds, one month shutdown, maintenance of law should be adopted dry, wet maintenance shutdown method can be used the following month. (1) Wet regimen: After Shutdown of the water discharge released, the internal completely remove the dirt, rinse, refill treated water to the full, the water was heated to 100 deg.] C oven, so that the water discharge gas outside of the furnace, then close all the valves, cold climates where moisture can not support the use of law, so as not to damage the boiler furnace water freezes. (2) Dry regimen: the boiler furnace shutdown to discharge water, the inside completely remove the dirt, rinse, drying in the furnace with Weihuo (be careful not to fire), and a diameter of 10-30 millimeters block quicklime installed sub-plate, placed in the drum, without contacting the metal with lime, quicklime weight, calculated to the drum 8 kilograms per cubic meter volume, and then all of the manhole, the pipe valve closed hand holes, each of three months, check again, such as lime ingredients like broken, i.e. the need to replace, should be re-run the boiler and the lime disk unloading.
Further: LDR, WDR type electric heating top manufacturer boiler 8t lithuanias represent the vertical and horizontal, R represents water, but is not expressed as a hot water boiler, LDR, WDR also electric heating type steam boiler.
In the transformation process, side by rapid technical engineers FGR advanced combustion technologies, the use of flue gas recirculation and the outer loop is provided, withdrawing part of flue mixed with the combustion air, and then into the furnace through a burner, not directly part in the combustion, by reducing the effect of the combustion flame temperature to reduce the temperature and oxygen concentration, to achieve the purpose of reducing NOx generation. For now, for a large volume of gas top manufacturer boiler 8t lithuanias, low compared to the overall transformation of nitrogen to replace the boiler equipment will save a lot of costs. Fast boiler has a boiler in research and technology low nitrogen aspects of considerable industry experience, successful completion of the reconstruction project Dingzhou low nitrogen Erie boiler, significant cost savings for businesses.
First, the correct operation of condensing top manufacturer boiler 8t lithuanias. Work level condensing boiler with a preset value and the individual device operating parameters have a strong relationship, when the operator preset values for each parameter condensing boiler equipment and environmental regulation does not match, or the sequence of different operations may also be confusion cause the system Caton boiler condensation process, leading to excessive condensation of water, lack of pressure or temperature anomalies unchanged. Thus, before and during use condensing boilers preferably have professional guidance and operate strictly according to the instructions. Second, the maintenance and repair of condensing boilers. On some level, maintenance and repair condensing boiler can directly determine the useful life of stability and performance of the device. Condensing boiler shut down at any time, there are stringent performance standards, after a period of time before stopping power, but also for regular abnormal exclude dirt between the comprehensive clean-up and the line, once the line is damaged or loose parts should be timely make protective measures in accordance with the instructions in order to avoid late cause more accidents.