Projects time: 2012
Run industrial industrial boiler fluess areas requiring attention are what run industrial boilers to note what? Mainly industrial boilers to provide heat and power for other industrial production equipment in order to maintain the momentum of its production and operation. One of which is industrial boilers, mainly to maintain the steam-powered electricity generation or supply. Another is the traditional industrial boilers, coal as raw material which, powered by waste heat recovery, to maintain production run, it is widely used in industrial production. 1. Use industrial boiler operators, requires not only the knowledge and skills of skilled operators, the operation of the boiler should be prohibited from leaving their jobs, the boiler in a state of neglect, reduce accidents too much pressure boiler water level or higher The phenomenon. 2. When the boiler pressure increases, the staff should be subject to rigorous technical evaluation of relevant professional departments to be adjusted to avoid overpressure phenomenon mislead operator error without adjustment. Pressure gauge and safety valve common faults, while related to the operation of the operator should be strengthened. Timely processing of boiler operation anomalies. 3. Prior to the use of the boiler, the boiler should be fully checked structure and current and voltage is within the normal range. To avoid unreasonable boiler structure, poor weld quality, safety accessories related failures caused by industrial accidents occurred in the boiler during operation, and should be sufficient for boiler water treatment prior to use to reduce the incidence of accidents in the run and run.
Routine maintenance routine maintenance process gas industrial boiler flues gas boiler gas boiler can be divided into two parts: preparation and running before the start of the examination. Before starting to prepare: 1. Check the air pressure is normal, the valve leaks, the switching valve is in place. 2. The gas alarm system is tested to determine if it can work, and if the fan can be started. three. Check the water softening system. Softener should be in working condition, the tank level should be normal. 4. Check valve switch boiler and decontamination work. The circulation pump outlet valve closed, to start the circulation pump, slowly open the water outlet valve, the outlet pressure is adjusted to 0.3 ~ 0.35mpa, and the pressure is adjusted to reflux for 0.2 ~ 0.25mpa. Running check: 1. Open the power boiler, the boiler normal ignition operation monitoring, checking and each member state of the flame sound. 2. The heating boiler operating conditions can not be ignored, large and small units commutation control conditions should be normal. 4, the temperature difference of each recording circuit water, the water supply valve to adjust the return water temperature by two hours the water pressure and temperature recording every each circuit. 5. After checking the boiler pressure, temperature anomalies, should be stopped and checked. 6. Check the gas flow and gas pressure stability is within the normal range, to determine whether there is clogging the filter. 7. Check the pressure pump to see if there is abnormal noise and other anomalies.
At the end of 2017, China Guodian is located in Jiangxi Province Wanan Hydropower Plant After evaluating the situation, some of the steam industrial boiler flues used to purchase much-needed daily work. Sales Manager fast boiler combined with the actual situation of the power plant for its recommendation 2 0.5 tons of electrically heated steam boilers.