ZG is one top coal fuel heating boiler manufacturers in China, with long history and best technology to backup, also capable of design and fabricating this kind of boiler within the range of 1 to 320t/h, our products from gas fired boiler to biomass fired boiler, from firetube boiler to watertube boiler, from chain grate boiler to cfb boiler, from oil fired boiler to coal fired boiler. ZG Boiler is committed to manufacturing high quality and high efficiency boiler for both domestic and overseas consumers.
Personnel and to avoid faulty gas coal fuel heating boiler gas boiler prone to some fault in the use of the process in order to avoid it fails, we have to understand some of the considerations when using. When using a gas boiler, we should always carry out its care and maintenance of local failure timely maintenance and replacement, make sure it is working properly. Circulation pump pressure constant, the current increases and the flow drops, deterioration of the thermally conductive fluid, the viscosity increased, should be replaced or regenerated. New heat transfer fluid as a result of decomposition of aqueous or excluded gases in the system, should immediately open the vent valve of the exhaust gas. When the current is lower than normal circulation pump, the circulation pump efficiency is decreased, the flow rate decline may be heating pipes plug fouling, and should be cleaned. Low temperature liquid phase heat carrier outlet of the furnace, for lack of heat, and the exhaust gas temperature exceeds 300 ℃, the main problem is the fouling, soot blowing should be. As low exhaust gas temperature, the main issue is burning, mainly lack of the wind. Although the pressure furnace, the blast volume is not open, the furnace temperature is low, combustion insufficient strength. We should focus on rear seal machine check furnace slag, dust, etc. whether closing the ash outlet is good, with or without cold air leakage into large. Before and after the filter differential pressure increases, the pump inlet pressure drops, the filter may be stuck, the opening of the bypass, disassemble and clean the filter. Grate stuck. The reason is often broken or grate grate fall loose pins; coal grate has stuck to metallic inclusions; arched grate; slag filter (Eagles iron) sink tip and the grate stuck. Processing method: reverse hand grate plate debris removal, replacement breaking grate after the start, then jammed as startup, stop the rotation of the reasons detailed inspection to resolve. The iron eagle sink, both sides can pull the fire door pull hook n. Grate stop turning, it may be too loose chain, and sprocket meshing well, or badly worn sprocket, and chain-linked bad; the adjustment screws on both sides to re-adjust the tension grate, if still does not work, you need to exchange sprocket.
The Advanced Bio CFB technology further improves the well-known benefits of CFB technology's superior fuel flexibility, inherently low emissions, and high availability. Today, the Advanced Bio CFB technology offers efficient sub-critical coal fuel heating boilers up to 600 MWe for 100 % biomass firing. This technology also offers supercritical steam parameters for biomass and coal co-firing applications up to 800 MWe. This is the result of continuous development work, building on experience and data from over 400 CFB reference boilers.
July 26, 2016, Beijing, China Everbright Paper Co., Ltd. and the company signed a "split 6 tons of steam condensing gas steam coal fuel heating boiler contract" by the company responsible for the WNS6-1.25-YQ split condensing gas boiler steam to all production, installation and commissioning work. The product is the use of condensing technology, effective emission of harmful substances SOx, NOx, COx, is industrial boilers efficient and environmentally friendly solutions.